Before ordering marble floor polishing, people usually ask the same questions: how long will it take, will there be dust, what should I do beforehand and when can I walk on the floor? This guide answers them in the order things actually happen, from the inspection to caring for the floor afterwards.
Marble floor polishing: what happens step by step
Marble floor polishing runs in four stages: a free inspection, protecting the room and cleaning the floor, diamond grinding and polishing, and finally sealing plus care advice.
- Inspection. The specialist visits, assesses the floor and decides whether polishing alone is enough or grinding is needed too. That decides the price and the duration, see grinding vs polishing.
- Preparation. Furniture and the room are protected and the floor is deep cleaned.
- Grinding and polishing. Diamond discs from coarse to fine, finishing with professional compounds. More on the methods: types of marble polishing.
- Sealing. A protective sealer goes onto the stone, and at the end you get advice on daily care.
How long does marble floor polishing take
An area up to 20 m² is usually done in 4-6 hours, an average living room (20-40 m²) in one working day. The exact time depends on the surface and the condition of the floor, and we confirm it after the inspection.
| Area | Usual duration |
|---|---|
| Up to 20 m² | 4-6 hours |
| Average living room, 20-40 m² | 1 working day |
| Large area or badly damaged floor | Confirmed after the inspection |
If the floor has lost its shine but also has deep scratches, cracks or chipped tiles, the job counts as restoration and takes longer, see our restoration service.
How to prepare the room for polishing
Clear small items and fragile decor off the floor beforehand, and agree on large furniture during the inspection.
- remove rugs, plants, boxes and low decor as far as possible
- large furniture is either moved or covered and worked around, and we decide which at the inspection
- point out the main problems during the inspection: scratches, acid marks, stains, uneven tiles
- say which result you want: glossy or matt (honed)
Dust and cleanliness during the work
We work with water-fed machines with dust extraction: furniture and surroundings are covered, and we leave the site clean after the work. For wet versus dry processing, see types of marble polishing.
When you can walk on the floor and bring the furniture back
You can carefully walk on a polished floor after roughly 2-4 hours, and the sealer is fully dry after about 24 hours.
On that day it is better not to mop the floor or bring heavy furniture back. Felt pads under furniture legs help avoid new scratches.
Caring for the floor after polishing
To keep the shine, clean with a pH-neutral stone cleaner, remove sand and wipe up acidic liquids straight away.
- put a mat at the entrance: sand works like sandpaper
- wipe up wine, lemon and vinegar immediately
- do not use ordinary household cleaners with acids or wax
- renew the sealer from time to time
The full schedule is in the marble floor maintenance schedule, and for stains see how to remove stains from marble. To tell when it is time to polish again, read the warning signs.
Marble floor polishing in Yerevan and other cities in Armenia
We work in Yerevan and across Armenia. See the polishing service and the maintenance service, and for costs the price guide. Or book a free inspection and we will tell you what your floor needs.